The physical meter might update with a high frequency per second, while it is desired to have only values per minute. Each meter is bound to the DSMR protocol the physical meter supports.įor each meter it is possible to set a refresh rate at which the status is updated.
Specific meters are bound via the bridge to the smart meter.Ī smart meter consists typically out of minimal 2 meters.Ī generic meter and the electricity meter.
LOXONE BELGIE SERIAL
The bridge contains the serial port configuration. You always have to have a 'Dutch/Belgium Smart Meter'-bridge. # Supported Things # dsmrBridge (The Netherlands/Belgium)ĭsmrBridge: This is the device that communicated between the binding (serial) and its internal meters. To configure the serial port within openHAB see the general documentation about serial port configuration. If you are not living in the Netherlands/Belgium/Luxembourg but do want to read a meter please have look at the SmartMeter Binding.īecause the Dutch Meter standard is based on the IEC-62056-21 standard it might be desirable to build support for other country metering systems based on that standard in this binding. Luxembourg’s electricity meter "Smarty" that comply to V1.0.Īlthough DSMR v4.2 is not an official specification, the binding has support for this version.
When connecting this port from a serial port the data can be read out. The DSMR-binding is targeted towards Dutch, Belgium, Luxembourger and Austrian users having a smart meter (Dutch: 'Slimme meter').ĭata of Dutch/Belgium/Luxembourg/Austrian smart meters can be obtained via the P1-port.
0 kommentar(er)
